Service Plans

Keep your BYD New Energy Vehicle (NEV) in peak condition with our tailored service plans, designed for optimal performance and reliability. Our comprehensive maintenance includes essential services like brake fluid checks, coolant replacements, and timely software updates, ensuring your EV or plug-in hybrid runs smoothly.

Service plans are competitively priced and strategically designed to deliver long-term financial benefits. By securing your plan upfront, you lock in current market rates, ensuring optimal vehicle performance while mitigating the impact of future price increases and inflation. This proactive approach guarantees both reliability and cost efficiency for your investment.

Important Note:

To be eligible for purchase of a post-sale BYD Service Plan, your vehicle must be within the following mileage thresholds:

  • EV: Under 23,000 km
  • PHEV: Under 4,000 km

If your vehicle exceeds these limits, please contact us here and our team will be in touch to discuss servicing options.

Purchase now

Atto 1, Atto 2 & Atto 3 Service Schedule

3 year/60,000km Service Plan $928 including GST
6 year/120,000km Service Plan $2,334 including GST

Atto 1, Atto 2 & Atto 3

Item 12m/20,000km 24m/40,000km 36m/60,000km 48m/80,000km 60m/100,000km 72m/120,000km 84m/140,000km 96m/160,000km
Tighten the chassis fixing screws | | | | | | | |
Brake pedal and EPB switch | | |
Brake friction block and discs | | | | | | | |
Brake system pipelines & hoses | | |
Guide pin of brake caliper assembly checkup | | | | | | | |
Steering wheel and pull rod | | |
Drive shaft boot checkup | | |
Ball pin and boot checkup | | |
Check front and rear suspension | | |
Check tyres and inflation pressure (incl. TPMS) | | | | | | | |
Front and rear alignment checkup | | | | | | | |
Tyre rotation (customer responsibility) Check air pressure and tire condition at least once a month and conduct rotation every 10,000km
Door stop checkup (Apply 0.3-0.8g of grease) | | | | | | | |
Wheel bearings clearance checkup | | |
Check coolant level in expansion tank | | | | | | | |
Drive motor anti-freeze replacement R R
Inspect Brake Fluid level | | | | | | | |
Brake fluid replacement R R R R
Checking of vehicle module fault codes, DTC (cleared after recording) | | | | | | | |
Check & Tighten power battery tray, guard, crash bar and mounting point | | | | | | | |
Replacement of gear oil in transmission (NT30 transmission) R R R R
Check powertrain for fluid leakage & impact | | | | | | | |
Check High Voltage harness connector for lose or damage | | | | | | | |
Check High Voltage module appearance, deformation or oil stain checkup and replaced if needed | | | | | | | |
Check charging connector operation. | | | | | | | |
Checking of the activated carbon HEPA filter and replace if necessary. Every 6 months for harsh conditions | R | R | R | R
Checking of headlights, turning lights and cabin lighting | | | | | | | |
Check the operation of headlight height adjuster leveler | | | | | | | |
Check for foreign matter at EPS grounding point | | | | | | | |
Check EPS connector connection | | | | | | | |
Checking of the appearance of EPS ECU for corrosion | | | | | | | |
Checking of the connection between EPS ECU and motor for foreign bodies or corrosion* and replace if needed | | | | | | | |
Checking of the vehicle module for software update (updated if any) | | | | | | | |
Check High Voltage components for wading marks | | | | | | | |
Check the lock nut torque of wiper arm | | | | | | | |
Checking of hood lock and fasteners | | | | | | | |

Seal Service Schedule

Dynamic/Premium

3 Year/60,000km Service Plan $1,452 including GST
6 Year/120,000km Service Plan $3,596 including GST

Performance

3 Year/60,000km Service Plan $1,788 including GST
6 Year/120,000km Service Plan $4,726 including GST

Seal

Item 12m/20,000km 24m/40,000km 36m/60,000km 48m/80,000km 60m/100,000km 72m/120,000km 84m/140,000km 96m/160,000km
Tighten the chassis fixing screws | | | | | | | |
Brake pedal and EPB switch | | |
Brake friction block and discs | | | | | | | |
Brake system pipelines & hoses | | |
Guide pin of brake caliper assembly checkup | | | | | | | |
Steering wheel and pull rod | | |
Drive shaft boot checkup | | |
Ball pin and boot checkup | | |
Check front and rear suspension | | |
Check tyres and inflation pressure (incl. TPMS) | | | | | | | |
Front and rear alignment checkup | | | | | | | |
Tyre rotation (customer responsibility) Check air pressure and tire condition at least once a month and conduct rotation every 10,000km
Door stop checkup (Apply 0.3-0.8g of grease) | | | | | | | |
Wheel bearings clearance checkup | | |
Check coolant level in expansion tank | | | | | | | |
Drive motor anti-freeze replacement R R
Inspect Brake Fluid level | | | | | | | |
Brake fluid replacement R R R R
Checking of vehicle module fault codes, DTC (cleared after recording) | | | | | | | |
Check & Tighten power battery tray, guard, crash bar and mounting point | | | | | | | |
Replacement of gear oil in transmission (NT30 transmission) R R R R
Check powertrain for fluid leakage & impact | | | | | | | |
Check High Voltage harness connector for lose or damage | | | | | | | |
Check High Voltage module appearance, deformation or oil stain checkup and replaced if needed | | | | | | | |
Check charging connector operation. | | | | | | | |
Checking of the activated carbon HEPA filter and replace if necessary. Every 6 months for harsh conditions | R | R | R | R
Checking of headlights, turning lights and cabin lighting | | | | | | | |
Check the operation of headlight height adjuster leveler | | | | | | | |
Check for foreign matter at EPS grounding point | | | | | | | |
Check EPS connector connection | | | | | | | |
Checking of the appearance of EPS ECU for corrosion | | | | | | | |
Checking of the connection between EPS ECU and motor for foreign bodies or corrosion* and replace if needed | | | | | | | |
Checking of the vehicle module for software update (updated if any) | | | | | | | |
Check High Voltage components for wading marks | | | | | | | |
Check the lock nut torque of wiper arm | | | | | | | |
Checking of hood lock and fasteners | | | | | | | |
Replace wiper blades | | R | | R | |

Sealion 5 Service Schedule

3 ½ Year/60,000km Service Plan $2,014 including GST
6 ½ Year/120,000km Service Plan $4,800 including GST

Sealion 5

Item 6m/3,500km 18m/20,000km 30m/40,000km 42m/60,000km 54m/80,000km 66m/100,000km 78m/120,000km 90m/140,000km 102m/160,000km 114m/180,000km 126m/200,000km 138m/220,000km
Replace the oil and oil filter R R R R R R R R R R R R
Spark plug R R
Replace the fuel filter R R R R
Replace the air filter element R R R R
Check the crankcase ventilation system (PCV valve and ventilation hose) | | | | | | | | | | | |
Check the engine idle speed | | | | | |
Replace the carbon canister dust filter Every 2 years, 40,000km
Check the exhaust pipe connector for air leakage | | | | | |
Check the three-way catalyst for damage | | | | | |
Check the fuel tank cap, fuel lines and connections | | | | | |
Check the active carbon canister | | | | | |
Check and tighten the chassis fixing bolts | | | | | |
Check the brake pedal and electronic parking switch | | | | | |
Check the brake friction pads and brake discs | | | | | | | | | | | |
Check the brake system pipelines and hoses | | | | | |
Check the steering wheel and pull rod | | | | | |
Check the transmission shaft dust cover | | | | | | | | | | | |
Check all ball joints and dust covers | | | | | |
Check front and rear suspension components | | | | | |
Inspect front wheel and rear wheel alignment | | | | | |
Tyre rotation R R R R R R
Check all wheel bearings | | | | | |
Check the bonnet lock, hinges and release mechanism | | | | | | | | | | | |
Check coolant fluid level in the expansion tank | | | | | | | | | | | |
Check the brake fluid level | | | | | | | | | | | |
Check the DTC of vehicle module (clear after recording) | | | | | | | | | | | |
Check the power battery tray and crash bar | | | | | | | | | | | |
Check the powertrain for fluid leakage and damage | | | | | | | | | | | |
Check the high voltage wiring harness and connectors for security | | | | | | | | | | | |
Check the high voltage module for deformation | | | | | | | | | | | |
Check for contamination in the interface of each charging connector | | | | | | | | | | | |
Check the software of each vehicle module is updated | | | | | | | | | | | |
Check the high voltage components for signs of water ingress | | | | | | | | | | | |
Check bonnet bump stops for adjustment and signs of wear | | | | | | | | | | | |
Check operation of all exterior lights, bulb and LEDs lamps | | | | | |
Check front headlight main beam and low beam function | | | | | |
Check for any contamination at the EPS grounding point | | | | | |
Check the security of the EPS connector, check for loose connections pin security | | | | | |
Check the corrosion at EPS ECU | | | | | |
Check for contamination or corrosion at the connection between EPS ECU and drive | | | | | |
Check the pollen filter | | R | R | R | R | R |
Check the filter screen of PM2.5 quick tester (if any) | | | | | | | | | | | |
Low beam initial dip calibration Perform a calibration every 100,000 km
Replace Rear Drive motor oil * Every 80,000km or 54 months
Replace the engine coolant and electronic control coolant Replace coolant every 4 years or 100,000 km, whichever comes first
Changing Brake Fluid Replace it every 2 years or 40,000km, and check it during routine
Check and replace EHS special gear oil Check EHS special gear oil quantity at each service. Change the EHS

Sealion 6 Service Schedule

Dynamic

3 ½ Year/60,000km Service Plan $2,054 including GST
6 ½ Year/120,000km Service Plan $5,106 including GST

Premium

3 ½ Year/60,000km Service Plan $2,095 including GST
6 ½ Year/120,000km Service Plan $5,280 including GST

Sealion 6

Item 6m/3,500km 18m/20,000km 30m/40,000km 42m/60,000km 54m/80,000km 66m/100,000km 78m/120,000km 90m/140,000km 102m/160,000km 114m/180,000km 126m/200,000km 138m/220,000km
Replace the oil and oil filter R R R R R R R R R R R R
Spark plug R R
Replace the fuel filter R R R R
Replace the air filter element R R R R
Check the crankcase ventilation system (PCV valve and ventilation hose) | | | | | | | | | | | |
Check the engine idle speed | | | | | |
Replace the carbon canister dust filter Every 2 years, 40,000km
Check the exhaust pipe connector for air leakage | | | | | |
Check the three-way catalyst for damage | | | | | |
Check the fuel tank cap, fuel lines and connections | | | | | |
Check the active carbon canister | | | | | |
Check and tighten the chassis fixing bolts | | | | | |
Check the brake pedal and electronic parking switch | | | | | |
Check the brake friction pads and brake discs | | | | | | | | | | | |
Check the brake system pipelines and hoses | | | | | |
Check the steering wheel and pull rod | | | | | |
Check the transmission shaft dust cover | | | | | | | | | | | |
Check all ball joints and dust covers | | | | | |
Check front and rear suspension components | | | | | |
Inspect front wheel and rear wheel alignment | | | | | |
Tyre rotation R R R R R R
Check all wheel bearings | | | | | |
Check the bonnet lock, hinges and release mechanism | | | | | | | | | | | |
Check coolant fluid level in the expansion tank | | | | | | | | | | | |
Check the brake fluid level | | | | | | | | | | | |
Check the DTC of vehicle module (clear after recording) | | | | | | | | | | | |
Check the power battery tray and crash bar | | | | | | | | | | | |
Check the powertrain for fluid leakage and damage | | | | | | | | | | | |
Check the high voltage wiring harness and connectors for security | | | | | | | | | | | |
Check the high voltage module for deformation | | | | | | | | | | | |
Check for contamination in the interface of each charging connector | | | | | | | | | | | |
Check the software of each vehicle module is updated | | | | | | | | | | | |
Check the high voltage components for signs of water ingress | | | | | | | | | | | |
Check bonnet bump stops for adjustment and signs of wear | | | | | | | | | | | |
Check operation of all exterior lights, bulb and LEDs lamps | | | | | |
Check front headlight main beam and low beam function | | | | | |
Check for any contamination at the EPS grounding point | | | | | |
Check the security of the EPS connector, check for loose connections pin security | | | | | |
Check the corrosion at EPS ECU | | | | | |
Check for contamination or corrosion at the connection between EPS ECU and drive | | | | | |
Check the pollen filter | | R | R | R | R | R |
Check the filter screen of PM2.5 quick tester (if any) | | | | | | | | | | | |
Low beam initial dip calibration Perform a calibration every 100,000 km
Replace Rear Drive motor oil * Every 80,000km or 54 months
Replace the engine coolant and electronic control coolant Replace coolant every 4 years or 100,000 km, whichever comes first
Changing Brake Fluid Replace it every 2 years or 40,000km, and check it during routine
Check and replace EHS special gear oil Check EHS special gear oil quantity at each service. Change the EHS

Sealion 7 Service Schedule

Premium

3 Year/60,000km Service Plan $1,370 including GST
6 Year/120,000km Service Plan $3,564 including GST

Performance

3 Year/60,000km Service Plan $1,757 including GST
6 Year/120,000km Service Plan $4,723 including GST

Sealion 7

Item 12m/20,000km 24m/40,000km 36m/60,000km 48m/80,000km 60m/100,000km 72m/120,000km 84m/140,000km 96m/160,000km
Tighten the chassis fixing screws | | | | | | | |
Brake pedal and EPB switch | | |
Brake friction block and discs | | | | | | | |
Brake system pipelines & hoses | | |
Guide pin of brake caliper assembly checkup | | | | | | | |
Steering wheel and pull rod | | |
Drive shaft boot checkup | | |
Ball pin and boot checkup | | |
Check front and rear suspension | | |
Check tyres and inflation pressure (incl. TPMS) | | | | | | | |
Front and rear alignment checkup | | | | | | | |
Tyre rotation (customer responsibility) Check air pressure and tire condition at least once a month and conduct rotation every 10,000km
Door stop checkup (Apply 0.3-0.8g of grease) | | | | | | | |
Wheel bearings clearance checkup | | |
Check coolant level in expansion tank | | | | | | | |
Drive motor anti-freeze replacement R R
Inspect Brake Fluid level | | | | | | | |
Brake fluid replacement R R R R
Checking of vehicle module fault codes, DTC (cleared after recording) | | | | | | | |
Check & Tighten power battery tray, guard, crash bar and mounting point | | | | | | | |
Replacement of gear oil in transmission (NT30 transmission) R R R R
Check powertrain for fluid leakage & impact | | | | | | | |
Check High Voltage harness connector for lose or damage | | | | | | | |
Check High Voltage module appearance, deformation or oil stain checkup and replaced if needed | | | | | | | |
Check charging connector operation. | | | | | | | |
Checking of the activated carbon HEPA filter and replace if necessary. Every 6 months for harsh conditions | R | R | R | R
Checking of headlights, turning lights and cabin lighting | | | | | | | |
Check the operation of headlight height adjuster leveler | | | | | | | |
Check for foreign matter at EPS grounding point | | | | | | | |
Check EPS connector connection | | | | | | | |
Checking of the appearance of EPS ECU for corrosion | | | | | | | |
Checking of the connection between EPS ECU and motor for foreign bodies or corrosion* and replace if needed | | | | | | | |
Checking of the vehicle module for software update (updated if any) | | | | | | | |
Check High Voltage components for wading marks | | | | | | | |
Check the lock nut torque of wiper arm | | | | | | | |
Checking of hood lock and fasteners | | | | | | | |
Replace wiper blades | | R | | R | |

Sealion 8 Service Schedule

Dynamic FWD

3 ½ / 60,000km Service Plan $2,157 including GST
6 ½ / 120,000km Service Plan $5,331 including GST

Dynamic AWD/Premium AWD

3 ½ / 60,000km Service Plan $2,157 including GST
6 ½/120,000km Service Plan $5,553 including GST

Sealion 8

Item 6m/3,500km 18m/20,000km 30m/40,000km 42m/60,000km 54m/80,000km 66m/100,000km 78m/120,000km 90m/140,000km 102m/160,000km 114m/180,000km 126m/200,000km 138m/220,000km
Replace the oil and oil filter R R R R R R R R R R R R
Spark plug R R
Replace the fuel filter R R R R
Replace the air filter element R R R R
Check the crankcase ventilation system (PCV valve and ventilation hose) | | | | | | | | | | | |
Check the engine idle speed | | | | | |
Replace the carbon canister dust filter Every 2 years, 40,000km
Check the exhaust pipe connector for air leakage | | | | | |
Check the three-way catalyst for damage | | | | | |
Check the fuel tank cap, fuel lines and connections | | | | | |
Check the active carbon canister | | | | | |
Check and tighten the chassis fixing bolts | | | | | |
Check the brake pedal and electronic parking switch | | | | | |
Check the brake friction pads and brake discs | | | | | | | | | | | |
Check the brake system pipelines and hoses | | | | | |
Check the steering wheel and pull rod | | | | | |
Check the transmission shaft dust cover | | | | | | | | | | | |
Check all ball joints and dust covers | | | | | |
Check front and rear suspension components | | | | | |
Inspect front wheel and rear wheel alignment | | | | | |
Tyre rotation R R R R R R
Check all wheel bearings | | | | | |
Check the bonnet lock, hinges and release mechanism | | | | | | | | | | | |
Check coolant fluid level in the expansion tank | | | | | | | | | | | |
Check the brake fluid level | | | | | | | | | | | |
Check the DTC of vehicle module (clear after recording) | | | | | | | | | | | |
Check the power battery tray and crash bar | | | | | | | | | | | |
Check the powertrain for fluid leakage and damage | | | | | | | | | | | |
Check the high voltage wiring harness and connectors for security | | | | | | | | | | | |
Check the high voltage module for deformation | | | | | | | | | | | |
Check for contamination in the interface of each charging connector | | | | | | | | | | | |
Check the software of each vehicle module is updated | | | | | | | | | | | |
Check the high voltage components for signs of water ingress | | | | | | | | | | | |
Check bonnet bump stops for adjustment and signs of wear | | | | | | | | | | | |
Check operation of all exterior lights, bulb and LEDs lamps | | | | | |
Check front headlight main beam and low beam function | | | | | |
Check for any contamination at the EPS grounding point | | | | | |
Check the security of the EPS connector, check for loose connections pin security | | | | | |
Check the corrosion at EPS ECU | | | | | |
Check for contamination or corrosion at the connection between EPS ECU and drive | | | | | |
Check the pollen filter | | R | R | R | R | R |
Check the filter screen of PM2.5 quick tester (if any) | | | | | | | | | | | |
Low beam initial dip calibration Perform a calibration every 100,000 km
Replace Rear Drive motor oil * Every 80,000km or 54 months
Replace the engine coolant and electronic control coolant Replace coolant every 4 years or 100,000 km, whichever comes first
Changing Brake Fluid Replace it every 2 years or 40,000km, and check it during routine service
Check and replace EHS special gear oil Check EHS special gear oil quantity at each service. Change the EHS oil and EHS filter every 4 years or 60,000km

Shark 6 Service Schedule

3 ½/60,000km Service Plan $2,080 including GST
6 ½/120,000km Service Plan $5,551 including GST

Shark 6

Item 6m/3,500km 18m/20,000km 30m/40,000km 42m/60,000km 54m/80,000km 66m/100,000km 78m/120,000km 90m/140,000km 102m/160,000km 114m/180,000km 126m/200,000km 138m/220,000km
Replace the oil and oil filter R R R R R R R R R R R R
Spark plug R R
Replace the fuel filter R R R R
Replace the air filter element R R R R
Check the crankcase ventilation system (PCV valve and ventilation hose) | | | | | | | | | | | |
Check the engine idle speed | | | | | |
Replace the carbon canister dust filter Every 2 years, 40,000km
Check the exhaust pipe connector for air leakage | | | | | |
Check the three-way catalyst for damage | | | | | |
Check the fuel tank cap, fuel lines and connections | | | | | |
Check the active carbon canister | | | | | |
Check and tighten the chassis fixing bolts | | | | | |
Check the brake pedal and electronic parking switch | | | | | |
Check the brake friction pads and brake discs | | | | | | | | | | | |
Check the brake system pipelines and hoses | | | | | |
Check the steering wheel and pull rod | | | | | |
Check the transmission shaft dust cover | | | | | | | | | | | |
Check all ball joints and dust covers | | | | | |
Check front and rear suspension components | | | | | |
Inspect front wheel and rear wheel alignment | | | | | |
Tyre rotation R R R R R R
Check all wheel bearings | | | | | |
Check the bonnet lock, hinges and release mechanism | | | | | | | | | | | |
Check coolant fluid level in the expansion tank | | | | | | | | | | | |
Check the brake fluid level | | | | | | | | | | | |
Check the DTC of vehicle module (clear after recording) | | | | | | | | | | | |
Check the power battery tray and crash bar | | | | | | | | | | | |
Check the powertrain for fluid leakage and damage | | | | | | | | | | | |
Check the high voltage wiring harness and connectors for security | | | | | | | | | | | |
Check the high voltage module for deformation | | | | | | | | | | | |
Check for contamination in the interface of each charging connector | | | | | | | | | | | |
Check the software of each vehicle module is updated | | | | | | | | | | | |
Check the high voltage components for signs of water ingress | | | | | | | | | | | |
Check bonnet bump stops for adjustment and signs of wear | | | | | | | | | | | |
Check operation of all exterior lights, bulb and LEDs lamps | | | | | |
Check front headlight main beam and low beam function | | | | | |
Check for any contamination at the EPS grounding point | | | | | |
Check the security of the EPS connector, check for loose connections pin security | | | | | |
Check the corrosion at EPS ECU | | | | | |
Check for contamination or corrosion at the connection between EPS ECU and drive | | | | | |
Check the pollen filter | | R | R | R | R | R |
Check the filter screen of PM2.5 quick tester (if any) | | | | | | | | | | | |
Low beam initial dip calibration Perform a calibration every 100,000 km
Replace Rear Drive motor oil * Every 80,000km or 54 months
Replace the engine coolant and electronic control coolant Replace coolant every 4 years or 100,000 km, whichever comes first
Changing Brake Fluid Replace it every 2 years or 40,000km, and check it during routine
Check and replace EHS special gear oil Check EHS special gear oil quantity at each service. Change the EHS oil and EHS filter every 4 years or 60,000km
Replace front differential gear oill Every 80,000km or 54 months

FAQ’s

I don’t do big mileage do I still have to service every year?

Yes, a number of items are impacted by time as well as mileage, for example brake fluid needs to be replaced every 2 years in most brands of cars on the road and this is always time based not mileage based as over time the brake fluid can get water into it.

Electric Vehicle don’t have moving parts so don’t need servicing

This is a myth we see often, and this is completely incorrect. Your BYD has several filters, drive motor antifreeze, gear oil and brake fluid, etc. that still need replacing. Like an ICE vehicle, every brand has different requirements, but all EV vehicles do require some form of servicing.

Can I use this service plan nationally?

Yes your service plan can be used at any BYD franchised dealer across New Zealand.

Is the service plan transferable?

Unfortunately we are unable to offer transferability of the service plan, if you are likely to replace your vehicle inside 4 years we recommend the 3 year service plan

What are the Terms and Conditions?

Full terms and conditions for each model are here: Shark 6 Service Plan Details, Sealion Service Plan Details, Seal Service Plan Details and ATTO Dolphin Service Plan Details.

Purchase a Service Plan

Price range: $928.00 through $5,553.00

Additional information

Model

Atto 1/2/3, Seal Dynamic/Premium, Seal Performance, Sealion 5 Essential/Premium, Sealion 6 Dynamic, Sealion 6 Premium, Sealion 7 Premium, Sealion 7 Performance, Sealion 8 Dynamic FWD, Sealion 8 Dynamic AWD/Premium AWD, Shark 6 Premium
Service Plan Duration

3 Year / 60,000km, 6 Year / 120,000km, 3 ½ Year / 60,000km, 6 ½ Year / 120,000km